1. Material options FCXVE construction

  • Heavy-gauge hot-dip galvanized steel is used for external unit steel panels and structural elements featuring Baltiplus 800TM Corrosion Protection. 
  • The Baltiplus 810TM coating is an optional extra. A hybrid polymer coating for longer service life, applied pre-assembly to all hot-dip galvanized steel components of the unit. 
  • Optional stainless steel panels and structural elements of type 304 or 316 for extreme applications.
  • Or the economical alternative: a water-contact stainless steel cold water basin. Its key components and the basin itself are stainless steel.

2. Heat transfer media

Unique and patented heat transfer system: featuring combined flow via heat exchange coil and fill pack.

Coil

CXV coil section

  • The coil is constructed of continuous length of prime surface steel, hot-dip galvanized after fabrication.
  • Designed for maximum 18 bar operating pressure according to PER. Pneumatically tested at 26.5 bar.

Try our CXVE coil options:

  • Multiple circuit coils (split coils) for your halo carbon refrigerants, maintaining individual compressor systems. Or use it for compressor jacket water or glycol cooling. 
  • Stainless steel coils are in type 304L or 316L. 
  • High pressure coils are designed for 28 bar operating pressure and pneumatically tested for 40 bar. Hot-dip galvanized after fabrication.

All coils are designed for low pressure drop with sloping tubes for free drainage of fluid.

Fill

  • BACross II fillPatented BACross II fill with integrated drift eliminators certified by Eurovent. In comprehensive lab thermal performance tests it showed proved thermal cooling tower performance and offers you unrivalled system efficiency. The fill pack includes individual sheets and a telescopic fill support. Sheets are easy to inspect and clean inside the tower without dismantling, eliminating the need for frequent fill replacement.
  • In self-extinguishing plastic, which will not rot, decay or decompose.
  • For operation above 50°C, try our optional high temperature fill, usable with spray water up to 55°C.

3. Air movement system

  • CXVE fan system features two corrosion resistant sheaves, belt and motor. Together with the heavy duty fan shaft bearings and the moisture protected motor, this guarantees optimal and year-round operational efficiency. Fan drive system
  • Low kW and noise axial fan(s) in corrosion resistant aluminum, encased in fan cylinder with removable fan guard. To reduce noise even further, choose for a Whisper Quiet fan with minimal impact on thermal performance.
  • Our drift eliminators in the coil section come in UV-resistant plastic, which will not rot, decay or decompose and their performance is tested and certified by Eurovent. They are assembled in easily handled and removable sections, for optimal coil access.
  • Easy removable UV-resistant plastic combined inlet shields at air inlet or optional at the top air inlet, block sunlight to prevent biological growth in tower, filter air and stop water splash-out.

4. Water distribution system

FXV-D spray systemThese consist of:

  • Spray branches with wide non-clog, plastic, 360° distribution nozzles secured in grommets. Overlapping spray pattern for complete coil wetting. A sloped cold water basin with:
    - large hinged and inward swinging access door
    - anti-vortexing strainers and make up both easily accessible from inside the unit.
  • Close coupled, bronze fitted centrifugal spray pump with totally enclosed fan cooled (TEFC) motor. Bleed line with metering valve installed from pump discharge to overflow.

Need more information? Contact your local BAC representative.